激光切割加工中出現什么問題會出現次品

　 激光切割加工中出現什么問題會出現次品?

   高質量的激光切割加工是不會出現精度不夠、產品出現熔渣、毛刺、切割截面齒紋明顯等一系列問題的，其實激光切割薄板出現燒邊的問題也可以避免，這些都不會因為材質的問題受影響。所以一旦出現這些問題，無論廠家如何解釋，這些都是不合格的。其實這些問題只要會調節都是可以改變的，就像切割邊緣鋸齒非常明顯這種，大多數是切割的速度調的太快，而活著電極噴嘴不同軸等情況。當然還有一種可能是切割超過設備切割能力的產品，因為功率達不到所以切割的非常費力，表面鋸齒就會非常明顯。

    從上面的介紹我們可以看出，除了技術人員的問題之外，設備的優劣也會影響激光切割產品的質量。所以大家選擇激光切割交給你廠家的時候，可以先了解一下設備情況。總的來說，激光切割加工出現毛刺、熔渣、鋸齒、精度不高等問題之后都代表了產品的不合格。當然這些問題當中毛刺算是比較小的問題，只不過需要后期人工用矬子搓掉。(http://blomberginsulation.com)

  What problems will happen in laser cutting process?
The high quality laser cutting is not accurate enough, the product appears slag, burr, cutting cross section tooth lines obvious and so on a series of problems, in fact, the laser cutting thin plate burning edge problems can also be avoided, these will not be affected by the material problems. So once these problems arise, no matter how the manufacturer explains, these are not qualified. In fact, these problems can be changed as long as the adjustment can be changed, like cutting edge saw teeth very obvious this, most of the cutting speed is too fast, and the living electrode nozzle of different axis and other conditions. Of course, there is one kind of product that can cut more than the cutting ability of the equipment, because the power can not reach the very hard cutting, the surface zigzag will be very obvious.
From the above introduction, we can see that apart from the technical personnel's problems, the quality of the equipment will also affect the quality of laser cutting products. So when you choose laser cutting to your manufacturers, you can first understand the equipment. On the whole, laser cutting appears problems such as burrs, slag, sawtooth, and low accuracy. Of course, burr is a relatively small problem in these problems, but it needs to be rubbed off later.

新聞、技術文章、資料下載網站聲明
資料編輯人：北京激光切割小編
德航隆工
電話： 13901087230

• 北京激光切割加工的原理分析

  2024-01-10

• 2016年春節德航隆工激光切割加工開工通知

  2016-02-20

• 北京德航隆工承接各種材質激光切割加工業務

  2015-06-23

• 不銹鋼切割的過程中容易出現的問題

  2014-08-26

• 想要開不銹鋼加工廠應該準備或注意什么

  2014-08-14